Welcome to the new Lighting Trendz website. In order to keep your previous account information and order history, please reset your password below.
Power the wire harness by connecting the red wire to any 12V positive connection and the black wire to ground. Alternatively, use the included cigarette lighter power adapter by connecting the red wire to the adapter's red wire and the black wire to its black wire.
Install the lights in the desired location by pushing them securely into any gap or split in your interior. Use a squeegee or credit card to help fit the lights in tight areas. Note that the lights only bend in one direction, so test them before installing and keep this in mind. Run the wires cleanly and tuck them into cracks and crevices as necessary for the best results.
Each strip can be cut to fit as needed using common household scissors. You can cut the strip before or after any LED. If you experience flickering after cutting through an LED, cut a little more off and the lights should work normally. Do not cut the wire end; cut it away from the wire.
Power each strip by connecting it directly to the wiring harness using the included extension wire. Hide the wires as best you can.
To control the lights, open the LED Hue app and enjoy!