Lit Logos Mitsubishi Diamond RGB Badge

Mitsubishi RGB Diamond Badge

The Mitusbishi RGB diamond badge by Lit Logos  will light up your ride like nothing else! Their Diamonds badge was designed to fit any Evo grille, OEM or aftermarket, but will also work on many other cars! These logos light up any color you want and the color can be changed at any time with your phone through a bluetooth app.

Installation is easy with our step by step install guide, with most people being able to install their Diamond Lit Logo in under an hour. Their logo can mount to almost any OEM or aftermarket grille via two different mounting methods described below.


They designed this logo to draw as little power as possible while remaining brighter than anything else out there. With their bluetooth app, you can always turn the logo off to save your battery. Don't worry if you forget to turn it off one night! As long as you drive your car once every couple of days, you can leave the logo running 24/7 and your battery will last! 

Mounting the logo to your grille:

• OEM Grilles: For most OEM grilles where the OEM Diamonds badge is found on plastic or metal bodywork, (i.e. Evo X) there is some trimming required in order for the badge to have a flush fit where the OEM badge was. They include a stencil to help make the install as seamless as possible. Once installed, the logo completely covers any trimming and fits flush with an OEM+ finish. They have personally installed this logo on the following vehicles
  
  • 2008-2016 Lancer Evolution X
    
    
• Their logo was designed using the OEM Diamonds badge (P/N 7415A603). The following cars use the same badge and our badge will also fit these cars:
  • 2008-2016 Lancer (DE, ES, Evolution GSR, Evolution MR, GTS, Ralliart)
  • 2010-2019 Outlander (ES, GT, SE, XLS)
  • 2014-2020 Mirage (DE, ES, RF, GT, SE, LE)
  • 2022-2024 Eclipse (ES, LE, SE, SEL)
  • Their logo will likely fit almost any OEM Diamond badge. 
    
    
• Mesh Grille: If your grill has the OEM Diamonds badge on a mesh grill, or you don't have an OEM Diamonds badge at all, then they have you covered as well! Along the backside of the logo there are some channels to use the included zip ties to mount the logo to ANY mesh grille.
  • Evo 9 uses the mesh grille installation
     
  • Note for mesh grilles: If you have a grille with a fine metal mesh, you may need to snip one of the links in order to fit the wire through the grille. The connector is 11mm at its widest part. Once the logo is installed, any modification will be completely hidden. 
    
    
• Evo 8: Due to size differences in the OEM badge, their diamonds badge will not fit the Evo 8 OEM bumper. If you have swapped the OEM bumper to an aftermarket bumper and it has a mesh grille, then this will fit the mesh grille!

Dimensions LxWxD

Diamonds: 3.8" x 3.4" x 0.75"

Order Includes