BLUEGHOZT LITE 2.0 BLUETOOTH FLOW SERIES CONTROLLER KIT

BLUEGHOZT LITE BLUETOOTH FLOW SERIES CONTROLLER

*If choosing the wiring yourself option, you will need to wire in the power & ground wires as well as the turn signal & parking light wires into the controller via the terminals inside. (Turn signal and parking light wires are not included.)

*If choosing the pre-wired option, all wiring will be installed in the controller for you. (Turn signal and parking light wires are not included.)

Issues due to weathering or being installed outside of the vehicle will void warranty on this controller.

***Pre-Wired Ghozt Controllers have a 3-5 business day lead time***

It is controlled via iOS and Android devices via Bluetooth and works with ws2811, ws2812b, SK6812, and similar Flow Series addressable LEDs. It supports both RGB Flow and RGBW Flow types of LED. Works with both 5V or 12V versions of addressable LEDs. It provides similar animation capabilities as the original Ghozt module. Blue Ghozt Connectors are included which plug and play with many off-the-shelf addressable RGB Flow Series LED kits. Screw terminals are included on the board for solder-less connections.

BlueGhozt LITE and PLUS are identical in every way except that the LITE does not have 4 +12V power switches for controlling 12v accessories.

*5V Selection includes Regulator Box which is essential to the install.   Without the regulator box plugged into the BlueGhozt controller, all 5V lights would be overpowered and potentially fry themselves. 5V lights are distinguished by the 3-pin connectors that are on the end of the strips/halos/boards etc.

*12V Selection will work for all 12V Flow Series lights we sell; 12V lights usually have 5-pin barrel connectors on the end of the strips to distinguish them. 

* Due to this being manufactured by an outside vendor, in order to process a warranty replacement we require the original controller in for testing*

Wiring Tips

Flow Series Wiring

BlueGhozt Instructions

Order Includes